At a glance
What this knot is for
- Joins
- Line to hook, swivel or lure eye
- Line types
- Mono, fluorocarbon and braid.
Reach for it when
- Hook and swivel connections in mono, fluorocarbon or braid
- A single knot for anglers who want to carry fewer knots in their head
Method
How to tie the uni knot
- 1Pass the tag end through the eye and lay it back alongside the standing line, leaving a long tag.
- 2Form a loop by laying the tag end over both strands.
- 3Wrap the tag end around the two lines and through the loop 5–7 times for mono, 7–8 for braid.
- 4Moisten the wraps and pull the tag end to snug the coils together, without fully tightening against the eye yet.
- 5Pull the standing line to slide the finished knot down to the eye.
- 6Trim the tag end.
Work on a flat surface with enough line in your hand to pull the knot down firmly, and check the wraps sit neatly before you trim anything away.
Why it works
- Reliable and reasonably strong across all common line types
- Doubles as a strong, adjustable loop if not slid fully closed
Where it lets you down
- Too few wraps on braid lets the knot slip; more turns are needed than for mono
- Must be wetted before the final pull on fluorocarbon
Research
Sources
This page was researched from the published guidance below and written in our own words.
Shop
The tackle this knot ties
The knot itself costs nothing - it joins your line to the tackle you buy. This search shows the general category this knot is tied onto, never a named brand or model.
Shop fishing hooks and swivelsAlternatives
Knots that do a similar job
Used in
Fishing methods that use this knot
Keep going
More knots worth learning
Check the rules where you fish
Some waters restrict tackle or methods - barbless hooks, lead sinkers, certain rigs and line types. Confirm the rules of the water you are fishing before you use any rig or knot.